Dell 2355dn

149
5 Press to go to the upper menu.
6 Press Start ( ) . (on the touch screen or the operator panel)
NOTE: You can cancel the copy job at any time. Press , and the copying will stop.
Clone Copying
This special copy mode can be applied when you load a document using only the document glass.
If a document is detected on the DADF, the
Clone copying feature does not work.
NOTE: You cannot adjust the copy size using the Zoom menu while making a clone copy.
To make the Clone copying:
1 Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2 Press Copy from the home screen.
3 Press the left/right arrows to select Clone Copy .
4 If necessary, customize the copy settings including number of copies, contrast, original type,
and original size by pressing
Options . See "Setting Copy Options".
5 Press to go to the upper menu.
6 Press Start ( ) . (on the touch screen or the operator panel)
NOTE: You can cancel the copy job at any time. Press , and the copying will stop.
Poster Copying
This special copy mode can be applied when you load a document using only the document glass. If
a document is detected in the DADF, the Poster copying feature does not work.
NOTE: You cannot adjust the copy size using the Zoom menu button for making a poster.
To make the Poster copying:
1 Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2 Press Copy from the home screen.
3 Press the left/right arrows to select Poster Copy .
4 If necessary, customize the copy settings including number of copies, contrast, original type,
and original size by pressing
Options . See "Setting Copy Options".
5 Press to go to the upper menu.
6 Press Start ( ) . (on the touch screen or the operator panel)
NOTE: You can cancel the copy job at any time. Press , and the copying will stop.