Dell 2355dn

200
Setting Sounds
Speaker, Ringer, Dial Tone, Fault, Conflict, and Selection
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Initial Setup .
4 Press the up/down arrows to select Sound & Volume .
5 Press the up/down arrows to select the appropriate option you want.
•
Speaker : Turns On or Off the sounds from the telephone line through the speaker, such
as a dial tone or a fax tone. With this option set to
Comm. which means Comm. , the
speaker is on until the remote machine answers.
•
Ringer : Adjusts the ringer volume. For the ringer volume, you can select Off , Low ,
Med , and High .
•
Dial Tone : Adjusts the dial tone volume. For the dial tone volume, you can select 1-7.
•
Fault : Adjusts the ‘error occurs’ volume. For the error volume, you can select Off ,
Low , Med , and High .
•
Conflict : Adjusts the conflict volume. For the error volume, you can select Off , Low ,
Med , and High .
•
Selection : You can set the selection volume for when pressing the button, you can
select
Off , Low , Med , and High .
6 Press the home icon ( ) to return to the Standby mode.
Toll Save Mode
The Toll Save mode can be used to save scanned documents for transmission at a specified time
in order to take advantage of lower long distance rates.
To turn the
Toll Save mode on:
1 Press Setup Machine Setup from the home screen.
2 Press the Next ( ) button.
3 Press the up/down arrows to select Fax Setup .
4 Press the up/down arrows to select Toll Save .
5 Press the left/right arrows to display On.
6 Select the Start Time and End Time each using the up/down arrows.
7 Press the home icon ( ) to return to the Standby mode.