Dell 2355dn

151
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of
paper. This special copy mode can be applied when you load a document using only the DADF.
NOTE: You cannot adjust the copy size using the Zoom menu for making a 2 Up or 4 Up copy.
1 Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "
Loading an Original Document".
2 Press Copy from the home screen.
3 Press N-up Copy Options .
4 Press N-up .
5 Press the left/right arrows to select 2 up or 4 up .
•
2 up : Copies two separate originals onto one page.
•
4 up : Copies four separate originals onto one page.
6 Press the left/right arrows to select Portrait or Landscape according to the original paper’s
orientation.
7 If necessary, customize the copy settings including number of copies, contrast, original size,
and original type. See "
Setting Copy Options".
8 Press to go to the upper menu.
9 Press Start ( ) . (on the touch screen or the operator panel)
NOTE: You can cancel the copy job at any time. Press , and the copying will stop.
Printing Copies on Both Sides of Paper
You can set the printer to print copies on both sides of paper.
1 Load the documents to be copied in the DADF.
For details about loading a document, see "
Loading an Original Document".
2 Press Copy from the home screen
3 Press the Options or Next ( ) button.
4 Press the up/down arrows to select Duplex .
5 Press the left/right arrows to select the binding option you want.
•
1->1 side : Prints in normal mode.
1 2
2-up copying
(Portrait)
s
2-up
copying
(Landscape)
s
1 2
3 4
4-up
copying
s
4-up
copying
(Landscape)
s
1 2