171
2
Press the left/right arrows to select
USB
.
3
Press the
Next
( ) button.
4
Click
Options
to adjust the settings for each scan.
•
Original Type
: Sets the original’s type.
•
Original Size
: Sets the image size.
•
Resolution
: Sets the image resolution.
•
Scan Color
: Sets the color mode. If you select Mono in this option, you cannot select JPEG in
Scan Format.
•
Scan Format
: You can select the file format before you proceed with the scanning job. If you
select
Mono
in
Scan Format
, do not select
JPEG
. Depending on the selected scan type, this
option may not appear.
•
Scan Duplex
: This feature especially applies when the original documents to be scanned are
two-sided.
•
File Name
: Names a file before you scan a document.
•
File Policy
: You can choose the policy for generating file name before you proceed with the
scan job through USB. If the USB memory already has the same name when you entered a
new file name, you can rename or overwrite it.
5
Press the home icon ( ) to return to the Standby mode.
To Next Page
Loading...
