Main
Memory Speed Displays the memory speed.
Advanced
Intel(R) SpeedStep (TM) Allows you to disable or enable Intel (R)
SpeedStep Technology.
NOTE: If enabled, the processor
clock speed and core voltage are
adjusted dynamically based on the
processor load.
Default: Enabled
Virtualization Allows you to disable or enable the Intel
Virtualization technology. Default: Enabled
VT for Direct I/O Allows you to disable or enable a Virtual
Machine Monitor (VMM) to use the
additional hardware capabilities provided
by Intel(R) Virtualization Technology for
Direct I/O. Default: Enabled
Integrated NIC Allows you to disable or enable the on-
board LAN controller. Default: Enabled
USB Emulation Allows you to enable or disable the USB
emulation feature. This feature defines
how the BIOS, in the absence of a USB-
aware operating system, handles USB
devices. USB emulation is always enabled
during POST. Default: Enabled
NOTE: You cannot boot any type of
USB device (floppy, hard drive, or
memory key) when this option is
disabled.
USB PowerShare Allows you to charge USB devices when the
computer is turned off or in standby mode.
Default: Enabled
USB Wake Support Allows you to enable USB devices to wake
the computer from standby or to disable
the USB wake support feature. Default:
Disabled
BIOS setup program 144
To Next Page
Loading...
