Dell Alienware 17 - 63 Removing the Display Back-Cover; Prerequisites; Procedure

Removing the display back-cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
NOTE
: This chapter is applicable only if you have purchased a laptop with non-
touchscreen display.
1 Remove the base panel.
2 Remove the wireless card.
3 Follow the procedure from step 1 to step 9 in “Removing the palm rest”.
4 Remove the display assembly.
5 Remove the display bezel.
6 Remove the display panel.
7 Remove the camera.
8 Remove the display-panel AlienFX LEDs.
9 Remove the Alienware AlienHead LED board.
Procedure
1 Disconnect the camera cable from the camera module.
2 Remove the display-board cable from the routing guides on the display back-
cover.
63
Removing the display back-cover 137