Dell Alienware 17 - 8 Replacing the Solid-State Drives; Procedure; Post-Requisites

Replacing the solid-state drives
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the hard
drive.
Topics:
• Procedure
• Post-requisites
Procedure
1 Slide the solid-state drive into the solid-state drive slot.
2 Replace the screw that secures the solid-state drive to the computer base.
Post-requisites
Replace the base panel.
8
Replacing the solid-state drives 25