Removing the front AlienFX LED
boards
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the base panel.
2 Follow the procedure from step 1 to step 9 in “Removing the palm rest”.
Procedure
1 Disconnect the front AlienFX LED board cables from the front AlienFX LED
boards.
2 Remove the screws that secure the front AlienFX LED boards to the computer
base.
3 Lift the front AlienFX LED boards off the computer base.
29
Removing the front AlienFX LED boards 72
To Next Page
Loading...
