Removing the solid-state drives
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the hard
drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the
computer is in sleep or on state.
Topics:
• Prerequisites
• Procedure
Prerequisites
Remove the base panel.
Procedure
NOTE
: Your computer can accommodate either one 2.5-inch hard drive or two
solid-state drives.
1 Remove the screw that secures the solid-state drive to the computer base.
2 Slide and remove the solid-state drive from the solid-state drive slot.
7
Removing the solid-state drives 23
To Next Page
Loading...
