Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your computer,
follow the instructions in After working inside your computer. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Adhere the coin-cell battery to the system board.
2 Connect the coin-cell battery cable to the connector on the system board.
Post-requisites
1 Follow the procedure from step 4 to step 10 in “Replacing the system board”.
2 Replace the display assembly.
3 Follow the procedure from step 5 to step 11 in “Replacing the palm rest”.
4 Replace the wireless card.
5 Replace the base panel.
40
Replacing the coin-cell battery 95
To Next Page
Loading...
