Security
Unlock Setup Status Displays if the setup status is unlocked.
Default: Unblocked.
Admin Password Status Displays if the administrator password is
clear or set. Default: Not set
System password Status Displays if the system password is clear
or set. Default: Not set
HDD password Status Displays if the HDD password is clear or
set. Default: Not set
NOTE: The password is set for all
the installed hard drives on your
computer.
Service Tag Displays the Service Tag of the computer
when the Service Tag is present. Displays
a field to input the Service Tag manually
when the Service Tag is absent.
NOTE: The Service Tag option is
available only when the Service
Tag is not set.
Admin Password Allows you to set the administrator
password. The administrator password
controls access to the BIOS setup
program utility.
System Password Allows you to set the system password.
The system password controls access to
the computer at boot.
HDD password Allows you to set, change, or delete the
hard-drives password.
Password Change Allows you to permit or deny system
password or HDD password changes.
Default: Permitted
BIOS setup program 147
To Next Page
Loading...
