Graphics Card 59
4
Connect the power cables to the graphics card.
Postrequisites
1
Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
2
Replace the left side-panel. See "Replacing the Left Side-Panel" on
page 27.
3
Follow the steps in "After Working Inside Your Computer" on page 15.
Installing Dual Graphic Cards
1
Locate the second PCI-Express x16 connector on the system board. See
"System-Board Components" on page 20.
2
Align the second graphics card with the second PCI-Express x16 card
connector on the system board.
3
Place the card in the connector and press down firmly. Ensure that the card
is firmly seated in the slot.
4
Replace the screws that secure the second graphics card to the chassis.
5
Connect the dual graphics bridge connecting the two graphics card.
6
Connect the two power cables to the graphics card.
book.book Page 59 Wednesday, May 16, 2012 2:37 PM
To Next Page
Loading...
