Dell D03T

Table 7. System setup options—Storage menu (continued)
Storage
Type Displays the slimline SAS PCIE SSD-1 type information of the system.
Device Displays the slimline SAS PCIE SSD-1 device information of the system.
Slimline SAS PCIE SSD-2
Type Displays the slimline SAS PCIE SSD-2 type information of the system.
Device Displays the slimline SAS PCIE SSD-2 device information of the system.
Slimline SAS PCIE SSD-3
Type Displays the slimline SAS PCIE SSD-3 type information of the system.
Device Displays the slimline SAS PCIE SSD-3 device information of the system.
Slimline SAS PCIE SSD-4
Type Displays the slimline SAS PCIE SSD-4 type information of the system.
Device Displays the slimline SAS PCIE SSD-4 device information of the system.
Slimline SAS PCIE SSD-5
Type Displays the slimline SAS PCIE SSD-5 type information of the system.
Device Displays the slimline SAS PCIE SSD-5 device information of the system.
Slimline SAS PCIE SSD-6
Type Displays the slimline SAS PCIE SSD-6 type information of the system.
Device Displays the slimline SAS PCIE SSD-6 device information of the system.
Slimline SAS PCIE SSD-7
Type Displays the slimline SAS PCIE SSD-7 type information of the system.
Device Displays the slimline SAS PCIE SSD-7 device information of the system.
Enable MediaCard
Secure Digital (SD) Card Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Table 8. System setup options—Display menu
Display
Primary Video Slot
Primary Video Slot Enable to determine which video controller becomes the primary display when
multiple controllers are available in the system.
By default, the Auto option is enabled.
Full Screen Logo Enable or disable full screen logo.
By default, the option is not enabled.
Table 9. System setup options—Connection menu
Connection
Netowrk Controller Configuration
Integrated NIC 1 Enable or disable the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
BIOS setup 123