● USB 3.2 Gen 2 (10 Gbps) Type-C port with DisplayPort
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 10 Gbps.
Maximum resolution supported up to 5120x3200 @60Hz with a Type-C to DisplayPort adapter.
3. Three USB 3.2 Gen 1 (5 Gbps) ports
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 5 Gbps.
4. Security-cable slot (for Kensington locks)
Connect a security cable to prevent unauthorized movement of your computer.
5. External antenna slot
Connect an external antenna for better connectivity.
6. Network port
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access.
7. Power-supply diagnostic light
Indicates the power-supply state.
8. Power-cord connector port
Connect a power cable to provide power to your computer.
9. Two expansion card slots
Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your computer.
10. Two USB 2.0 (480 Mbps) with SmartPower On ports
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 480 Mbps.
NOTE:
When USB wake is enabled in the BIOS, the computer powers on or wake from hibernation when a USB mouse
or keyboard that is connected to this port is used.
11. USB 3.2 Gen 2 (10 Gbps) port
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 10 Gbps.
12. Three DisplayPort 1.4a ports (HBR2 support)
Connect an external display or a projector.
NOTE: The maximum resolution that is supported is up to 4096x2304 @60Hz.
13. Retaskable line-out/line-in audio port
Connect recording or playback devices such as microphone or CD player.
Connect speakers.
10
Views of OptiPlex Small Form Factor Plus 7020
To Next Page
Loading...
Need help?
General