Dell OptiPlex Small Form Factor Plus 7020 User Manual

3. Slide the hard-drive assembly away from the chassis and remove the hard-drive assembly out of the disk-drive cage.
4. Pry the hard-drive carrier to release the mounting points on the carrier from the slots on the hard drive.
5. Lift the hard drive off the hard-drive carrier.
Installing the 3.5-inch hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-inch hard drive and provide a visual representation of the installation
procedure.
46 Removing and installing Customer Replaceable Units (CRUs)

Dell OptiPlex Small Form Factor Plus 7020 Specifications

General

Brand	Dell
Model	OptiPlex Small Form Factor Plus 7020
Category	Desktop
Language	English