Dell OptiPlex Small Form Factor Plus 7020 User Manual

3. Align the tabs on the hard-drive carrier with the slots on the chassis and snap the hard-drive assembly onto the disk-drive
cage.
4. Connect the data and power cables to the connectors on the hard drive.
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
Disk-drive cage
Removing the disk-drive cage
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 3.5-inch hard drive, if applicable.
About this task
The following images indicate the location of the disk-drive cage and provide a visual representation of the removal procedure.
48
Removing and installing Customer Replaceable Units (CRUs)

Dell OptiPlex Small Form Factor Plus 7020 Specifications

General

Brand	Dell
Model	OptiPlex Small Form Factor Plus 7020
Category	Desktop
Language	English