Table 33. System setup options—Integrated Devices menu(continued)
Integrated Devices
Enable Front USB Ports Enables the front USB ports.
By default, the Enable Front USB Ports option is enabled.
Enable Rear USB Ports Enables the rear USB ports.
By default, the Enable Rear USB Ports option is enabled.
Enable USB Boot Support Enables booting from USB mass storage devices that are connected to external
USB ports.
By default, the Enable USB Boot Support option is enabled.
Front USB Configuration Allows the user to enable of disable individual front USB ports.
By default, all the front USB ports are enabled.
Rear USB Configuration Allows the user to enable of disable individual rear USB ports.
By default, all the rear USB ports are enabled.
Dust Filter Maintenance
Dust Filter Maintenance Enables of disables BIOS messages for maintaining the optional dust filter
installed in the computer.
By default, the Dust Filter Maintenance option is disabled.
Table 34. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is selected.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD option.
By default, the SATA option is enabled.
By default, the M.2 PCIe SSD option is enabled.
SMART Reporting Displays the information of onboard drives.
Enable SMART Reporting Enables or disables the BIOS to report integrated hard-drive errors during system
startup.
By default, the Enable SMART Reporting option is disabled.
Drive Information Displays the information of onboard drives.
Enable MediaCard
Secure Digital (SD) Card Enables or disables the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Secure Digital (SD) Card Read-Only Mode Enables or disables the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
Table 35. System setup options—Display menu
Display
Multi-Display
BIOS Setup 123
To Next Page
Loading...
Need help?
General