Dell OptiPlex Small Form Factor Plus 7020 User Manual

Figure 38. Installing the Intrusion switch
Steps
1. Slide the intrusion switch into the slot on the chassis.
2. Connect the intrusion-switch cable to its connector (INTRUSION) on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
76
Removing and installing Customer Replaceable Units (CRUs)

Dell OptiPlex Small Form Factor Plus 7020 Specifications

General

Brand	Dell
Model	OptiPlex Small Form Factor Plus 7020
Category	Desktop
Language	English