Dell PowerConnect 55xx Systems User Guide 143
Monitoring Users Using the CLI Commands
The following table summarizes the CLI commands for monitoring users:
The following is an example of the CLI commands:
Table 8-15. Monitoring Users CLI Commands
CLI Command Description
show dot1x monitoring result
[username username]
Displays the captured information of each
interface/host on the switch/stack.
console# show dot1x monitoring Tom
Username: Tom
Port g1
Quiet period: 60 Seconds
Tx period: 30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 08:19:17
MAC Address: 00:08:78:32:98:78
Authentication Method: Remote
Assigned VLAN: 207
Reason for Failure:VLAN was not defined on Switch
To Next Page
Loading...
