Dell POWERCONNECT 5524P

Dell PowerConnect 55xx Systems User Guide 183
The following is an example of the CLI commands:
SNTP Interfaces
If receiving time information from Anycast servers is enabled, you can
determine through which interface the Anycast packets are sent and received.
If no interface is defined, Anycast requests are not sent.
console(config)# sntp server 100.1.1.1 poll key 10
console# show sntp status
Clock is unsynchronized
Unicast servers:
Server Status Last Response Offset Delay
[mSec] [mSec]
--------------- --------- ------------- -------- -------
Anycast server:
Server Interface Status Last Response Offset Delay
[mSec] [mSec]
--------------- -------- -------------- ------ ------
Broadcast:
Interface IP Address Last Response
------------ --------------- -----------------------
gi1/0/1 00:00:00.0 Jan 1 2010