Dell POWERCONNECT 5524P - Page 230

230 Dell PowerConnect 55xx Systems User Guide
4 To modify or remove an IPv6 neighbor, click Edit , and enter the fields
described on the
Add page.
5 If an entry for the specified IPv6 address already exists in the neighbor
discovery cache, as learned through the IPv6 neighbor discovery process,
you can convert the entry to a static entry. To do this, select
Static in the
Ty p e field.
Defining IPv6 Neighbors Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the IPv6 Neighbors pages.
Table 9-31. IPv6 Neighbors CLI Commands
CLI Command Description
ipv6 neighbor ipv6_addr
{[gigabitethernet|tengigabitethernet]
port-number|vlan vlan-id|port-channel
LAG-number]} mac_addr
no ipv6 neighbor ipv6_addr
{[gigabitethernet|tengigabitethernet]
port-number|vlan vlan-id|port-channel
LAG-number]}
Configures a static entry in
the IPv6 neighbor discovery
cache.
Use the no form of this
command to remove a static
IPv6 entry from the IPv6
neighbor discovery cache.
show ipv6 neighbors
{static|dynamic}[ipv6-address ipv6-
address] [mac-address mac-address]
[[gigabitethernet|tengigabitethernet]
port-number|vlan vlan-id|port-channel
LAG-number]]
Displays IPv6 neighbor
discovery cache information.
clear ipv6 neighbors Deletes all entries in the IPv6
neighbor discovery cache.