276 Dell PowerConnect 55xx Systems User Guide
The TACACS+ protocol ensures network integrity through encrypted
protocol exchanges between the device and TACACS+ server.
To configure TACACS+ servers:
1
Click
System
>
Management Security
>
TACACS+
in the tree view to
display the
TACACS+: Summary
page.
Figure 9-39. TACACS+: Summary
The list of currently-defined TACACS+ servers is displayed. The
parameters for each server is displayed, along with its connection status.
2
Enter the default parameters for TACACS+ servers. These values are used
unless values are added in the
TACACS+ Add
or
Edit
pages.
–
Source IP Address
— The device IP address used for the TACACS+
session between the device and the TACACS+ server. The default is
0.0.0.0., which means that any IP address of the device can be used to
communicate with the TACACS+ server.
To Next Page
Loading...
