Dell POWERCONNECT 5524P - Page 277

Dell PowerConnect 55xx Systems User Guide 277
– Key String (1-128 Characters) — The authentication and encryption
key for TACACS+ communications between the device and the
TACACS+ server. This key must match the encryption key sent by the
TACACS+ server. This key is encrypted.
–
Timeout for Reply (1-30) — The amount of time that passes before
the connection between the device and the TACACS+ server times
out.
3 To add a TACACS+ server, click Add , and enter the fields on the page.
The fields below are those that were not described on the
TACACS+:
Summary
page.
–
Host IP Address — Enter the TACACS+ server IP address.
–
Priority (0-65535) — Enter the order in which the TACACS+ servers
are used if several are defined.
–
Source IP Address — Enter either specific device IP address for the
TACACS+ server.
–
Authentication Port (0-65535) — Enter the port number through
which the TACACS+ session occurs.
–
Timeout for Reply (1-30) — Enter the amount of time that passes
before the connection between the device and the TACACS+ server
times out.
–
Single Connection — Check to maintain a single open connection
between the device and the TACACS+ server.