Dell POWERCONNECT 5524P - Page 298

298 Dell PowerConnect 55xx Systems User Guide
The following is an example of the CLI commands:
time-server ip-address [ip-
address2 ... ip-address8]
no time-server
Specifies the time servers list for a DHCP
client.
Use the no form of this command to remove
the time servers list.
next-server ip-address
no next-server
Configures the next server in the boot
process of a DHCP client.
Use the no form of this command to remove
the boot server.
next-server-name name
no next-server-name
Configures the next server name in the boot
process of a DHCP client.
Use the no form of this command to remove
the boot server name.
bootfile filename
no bootfile
Specifies the default boot image file name
for a DHCP client.
Use the no form of this command to delete
the boot image file name.
show ip dhcp pool network
[name]
Displays the DHCP network pool
configuration.
console(config)# ip dhcp pool network pool1
console(config-dhcp)# address 10.12.1.99 255.255.255.0
01b7.0813.8811.66
console(config-dhcp)# lease 1
Table 9-53. Network Pool CLI Commands (Continued)
CLI Command Description