Dell POWERCONNECT 5524P - Page 299

Dell PowerConnect 55xx Systems User Guide 299
Excluded Addresses
By default, the DHCP server assumes that all pool addresses in a pool may be
assigned to clients. A single IP address or a range of IP addresses can be
excluded.
To define an excluded address range:
1
Click System > DHCP Server > Excluded Addresses in the tree view to
display the
Excluded Addresses: Summary page.
Figure 9-44. Excluded Addresses: Summary
The previously-defined excluded IP addresses are displayed.
2 To add a range of IP addresses to be excluded, click Add , and enter the
fields:
–
Start IP Address — First IP address in the range of excluded IP
addresses.