Dell POWERCONNECT 5524P - Page 396

396 Dell PowerConnect 55xx Systems User Guide
The following is a script that creates an interface macro.
vlan database
vlan 40-50
@
Enter the commands in
the macro, which create
VLANs 40 through 50.
console(config)# do show parser macro
name interswitch
Display the macro.
console(config)# macro global apply
interswitch
Apply the macro.
Table 10-7. Create an Interface Macro Script
CLI Command Description
console#config
console(config)# interface range gi1/0/1-
24
Enter Interface mode
for ports 1-24 on unit 1.
console(config-if-range)# macro name
access_port
Enter macro commands one per line. End
with the character '@'.
Create a macro called
access_port.
disable spanning-tree
@
Enter the commands in
the macro, disables
spanning tree on the
interfaces.
console(config)# do show parser macro
name access_port
Display the macro.
console(config)# macro global apply
access_port
Apply the macro to
ports 1-24 on unit 1.
Table 10-6. Create a Global Macro Script (Continued)
CLI Command Description