Dell POWERCONNECT 5524P - Page 398

398 Dell PowerConnect 55xx Systems User Guide
• Down — Traffic is disabled through the port.
–
Current Port Status — Displays whether the port is currently
operational or non-operational.
–
Re-Activate Suspended Port — Check to reactivate a port if the port
has been disabled through the locked port security option.
–
Operational Status — Displays the port operational status. The
possible options are:
•
Suspended — Port is currently active, and is not receiving or
transmitting traffic.
•
Active — Port is currently active, and is receiving and
transmitting traffic.
•
Disable — Port is currently disabled, and is not receiving or
transmitting traffic.
–
Admin Speed — Select the configured rate for the port. The port type
determines the available speed setting options. You can designate
Administrative Speed only when port auto-negotiation is disabled.
–
Current Port Speed — Displays the actual synchronized port speed
(bps).
–
Admin Duplex — Select the port duplex mode (this is only possible if
Auto Negotiation is not enabled). The options are:
•
Full — The interface supports transmission between the device
and the client in both directions simultaneously.
•
Half — The interface supports transmission between the device
and the client in only one direction at a time.
–
Current Duplex Mode — Displays the synchronized port duplex
mode.
–
Auto Negotiation — Select to enable auto-negotiation on the port.
Auto-Negotiation enables a port to advertise its transmission rate,
duplex mode, and Flow Control abilities to other devices.
•
Energy Efficient Ethernet — Globally enable/disable Energy Efficient
Ethernet and the EEE LLDP advertisement feature.
–
Current Auto Negotiation — Displays the current auto-negotiation
setting.