Dell POWERCONNECT 5524P - Page 406

406 Dell PowerConnect 55xx Systems User Guide
shutdown
no shutdown
Disables the LAG.
Use the no form of this command to
restart the LAG.
speed {10|100|1000|10000}
no speed
Configures the speed of the LAG
when not using auto negotiation.
Use the no form of this command to
restore the default configuration.
negotiation [capability1
[capability2…capability5]
no negotiation
Enables auto negotiation operation for
the speed and duplex parameters of a
LAG.
Use the no form of this command to
disable auto-negotiation.
flowcontrol {auto|on|off}
no flowcontrol
Configures the flow control on a given
LAG.
Use the no form of this command to
disable flow control.
show interfaces configuration
[
port-channel LAG-number]
Displays the configuration for the
LAGs.
show interface advertise Displays the LAG’s negotiation
advertisement settings.
show interfaces status [port-
channel LAG-number]
Displays the status for all configured
LAGs.
show interfaces description
[
port-channel LAG-number]
Displays the description for all
configured LAGs.
show interfaces port-channel
[
LAG-number]
Displays LAG information.
Table 10-9. LAG Configuration CLI Commands (Continued)
CLI Command Description