Dell POWERCONNECT 5524P - Page 453

Dell PowerConnect 55xx Systems User Guide 453
• Add —Add these VLANS to the MST instance.
•
Remove —Remove these VLANS from the MST instance.
Mapping VLAN to MSTP Instances Using CLI Commands
The following table summarizes the CLI commands for mapping VLANs to
MSTP instances.
The following is an example of the CLI commands:
Table 13-5. Mapping VLAN to MSTP Instances Using CLI Commands
CLI Command Description
spanning-tree mst
configuration
Enters MST Configuration mode.
instance instance-id vlan
vlan-range
no instance instance-id
vlan vlan-range
Maps VLANs to an MST instance.
Use the no form of this command to restore
default mapping.
show spanning-tree detail Displays the spanning-tree configuration
console(config)# spanning-tree mst configuration
console(config-mst)# instance 1 vlan 10-20