480 Dell PowerConnect 55xx Systems User Guide
Defining VLAN Protocol Groups Using CLI Commands
The following table summarizes the CLI commands for defining VLAN
Protocol groups.
The following is a sample of the CLI commands:
Table 14-3. VLAN Protocol Groups CLI Commands
CLI Command Description
map protocol protocol
[encapsulation] protocols-
group group
no map protocol protocol
[encapsulation]
Maps a protocol to a protocol group.
Protocol groups are used for protocol-
based VLAN assignment.
Use the no form of this command to
delete a protocol from a group.
console (config)# vlan database
console (config-vlan)# map protocol ip protocols-group 213
To Next Page
Loading...
