Dell PowerConnect 55xx Systems User Guide 607
–
Excessive Collisions
— Number of frames for which transmission fails
due to excessive collisions.
–
Internal MAC Transmit Errors
— Number of frames for which
reception fails due to an internal MAC sublayer receive error.
–
Oversize Packets
— Number of frames received that exceed the
maximum permitted frame size.
–
Received Pause Frames
— Number of MAC Control frames received
with a PAUSE operation code.
–
Transmitted Pause Frames
— Number of MAC Control frames
transmitted on this interface with a PAUSE operation code.
3
Select one of the
Refresh Rate
options to clears the statistics for the
selected interface.
Viewing Interface Statistics Using the CLI Commands
The following table contains the CLI commands for viewing utilization,
counters and interface statistics.
Table 21-2. Interface Statistics CLI Commands
CLI Command Description
show interfaces counters
[[gigabitethernet|tengigabit
ethernet] port-number|port-
channel LAG-number]
Displays traffic seen by the physical
interface.
To Next Page
Loading...
