Dell POWERCONNECT 5524P - Page 608

608 Dell PowerConnect 55xx Systems User Guide
The following is an example of the CLI command for all ports:
The following is an example of the CLI command for a single port:
console# show interfaces counters
Port InUcastPkts InMcastPkts InBcastPkts InOctets
------- ------------ ----------- ----------- --------
gi2/0/1 0 0 0 0
gi2/0/2 0 0 0 0
gi2/0/3 0 0 0 0
gi2/0/4 0 0 0 0
gi2/0/5 0 0 0 0
Port OutUcastPkts OutMcastPkts OutBcastPkts OutOctets
--------- ------------ ------------ ------------ ------------
gi2/0/1 0 0 0 0
gi2/0/2 0 0 0 0
gi2/0/3 0 0 0 0
gi2/0/4 0 0 0 0
console# show interfaces counters gi1/0/1
Port InUcastPkts InMcastPkts InBcastPkts InOctets
-------- ------------- ------------ ------------ ------------
gi1/0/1 0 0 0 0
Port OutUcastPkts OutMcastPkts OutBcastPkts OutOctets
-------- ----------- ------------ ------------ ------------
gi1/0/1 0 0 0 0
Alignment Errors: 0
FCS Errors: 0
Single Collision Frames: 0
Multiple Collision Frames: 0
SQE Test Errors: 0
Deferred Transmissions: 0
Late Collisions: 0
Excessive Collisions: 0
Carrier Sense Errors: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Symbol Errors: 0
Received Pause Frames: 0