Dell POWERCONNECT 5524P - Page 644

644 Dell PowerConnect 55xx Systems User Guide
– Advanced — QoS is enabled in Advanced mode on the switch.
–
Disable — QoS is not enabled on the switch.
Setting QoS Mode Using CLI Commands
The following table summarizes the CLI commands for setting the QoS
mode.
The following is an example of the CLI commands:
Table 22-1. QoS Mode CLI Commands
CLI Command Description
qos [basic|advanced]
no qos
Enables QoS on the device.
Use the no form of this command to disable QoS
on the device
show qos Displays the QoS mode.
console(config)# qos basic