690 Dell PowerConnect 55xx Systems User Guide
–
Class Map
— Statistics are displayed for this class map.
–
In-Profile Bytes
— Number of in-profile bytes received.
–
Out-of-Profile Bytes
— Number of out-of-profile bytes received.
2
Click
Add
to add a new counter that applies to another policy-class map.
3
Enter the fields:
– Interface — Select the interface for which the counter is defined.
– Policy - Class Map Name — Select a policy class map pair.
Defining Policer Statistics Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Policer Statistics pages.
The following is an example of the CLI commands:
Table 22-19. Policer Statistics CLI Commands
CLI Command Description
qos statistics policer policy-
map-name class-map-name
no qos statistics policer
policy-map-name class-map-name
Enables counting in-profile and out-of-
profile bytes vis-a-vis a policer.
Use the no form of this command to
disable counting.
clear qos statistics Clears the statistics
show qos statistics Displays the statistics
console(config-if)# qos statistics policer policy1 class1
To Next Page
Loading...
