154 | Installing System Components
Installing the Interposer Extender Tray for 2U Node Tray
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Place the interposer-extender tray into the system board. See Figure 3-
14.
2 Replace the screws that secure the interposer extender tray to the
system board. See Figure 3-14.
3 Replace the interposer extender. See Figure 3-13.
4 Connect all the cables to the interposer extender. See Figure 5-10.
5 Replace the system-board assembly. See "Installing a System-Board
Assembly" on page 143.
Expansion-Card Assembly and Expansion Card
Removing the Expansion Card for 1U Node
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1 Remove the system-board assembly. See “Removing a System-Board
Assembly" on page 142.
To Next Page
Loading...
