Dell PowerEdge C6220 - Page 73

Installing System Components | 73
Option
Description
Turbo Mode
(Enabled default)
Enables processor Turbo Mode (requires EMTTM
enabled too.)
C-States
(Enabled default)
Enabled - The processor can operate in all available
Power C States.
Disabled - There are no C States available for the
processor.
C1E State
(Enabled default)
Enabled - The C1-E is enabled by default.
Disabled - The C1-E is disabled by users in their own
liability.
There are warning messages in both the BIOS Setup
help text and the pop up message when the option is
changing.
C6 State
(Enabled default)
Enabled - The C6 is disabled by default.
Disabled - The C6 is disabled by user in their own
liability.
There will be warning message in both the BIOS Setup
help text and the pop up message when the option is
changing.
C7 State
(Enabled default)
Enabled-The C7 is enabled by default.
Disabled-The C7 is disabled by users in their own
liability.
There will be warning message in both the BIOS Setup
help text and the pop up message when the option is
changing.
XD Bit Capability
(Enabled default)
Intel processors that support the eXecute Disabled
(XD) feature will Enable/ Disable report the support to
the operating system.
If the operating system supports this extended paging
mechanism, it will provide sum.
Direct Cache Access
(Enabled default)
Enables/Disables the Direct Cache Access.