Figure 53. Configuration 0: 6 x 2.5-inch NVMe GPU
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 65. Configuration 0: 6 x 2.5-inch NVMe GPU
Order From To
1. SIG_PWR_1 (system board power
connector)
BP_PWR_1 (Front backplane power connector)
2. SL15_CPU1_PB8 (signal
connector on system board)
BP_DST_PA2 (backplane signal connector)
3. SL11_CPU2_PB6 (signal
connector on system board)
BP_DST_PA1 (backplane signal connector)
4. SL12_CPU2_PA6 (signal
connector on system board)
BP_DST_PB1 (backplane signal connector)
90 Installing and removing system components
To Next Page
Loading...
