Steps
1.
NOTE:
Before disconnecting the fan cables from the system board, carefully peel off the (1) tweeter speaker from its
compartment next to the (2) connector to create more space for the disconnection.
Disconnect the right fan cable from the system board.
2. Remove the two (M2x4) screws that secure the right fan to the palm-rest and keyboard assembly.
3. Lift the right fan to remove it from the palm-rest and keyboard assembly.
After the fan cable is disconnected and the screws that are removed, lift the fan from its outer edge and slide it away from
the system.
28
Removing and installing components
To Next Page
Loading...
