Table 4. System setup options—Boot Configuration menu (continued)
Boot Configuration
By default, the Deployed Mode is enabled.
Expert Key Management
Enable Custom Mode Enable or disable custom mode.
By default, the custom mode option is not enabled.
Custom Mode Key Management Select the custom values for expert key management.
Table 5. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Memory Mapped I/O above 4 Gig Enable or disable the Memory Mapped I/O above 4 GB.
By default, the ON option is selected
Camera Enable or disable the camera.
By default, the Enable Camera option is selected
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
USB/Thunderbolt Configuration
● Enable or disable booting from USB mass storage devices that are
connected to external USB ports.
By default, the Enable External USB Ports option is enabled.
● Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, the Enable USB Boot Support option is enabled.
Enable Thunderbolt Technology
Support
Enable or disable the associated ports and adapters.
By default, the Enable Thunderbolt Technology Support option is selected.
Enable Thunderbolt Boot Support Enable or disable the Thunderbolt adapter-peripheral device and USB devices
that are connected to the Thunderbolt adapter to be used during BIOS Pre-
boot.
By default, the Enable Thunderbolt Boot Support option is disabled.
Enable Thunderbolt (and PCIe behind
TBT) pre-boot modules
Enable or disable the PCIe devices that are connected through a Thunderbolt
adapter to run the PCIe devices UEFI Option ROM (if present) during pre-
boot.
By default, the Enable Thunderbolt (and PCIe behind TBT) pre-boot
modules option is disabled.
Disable USB4 PCIE Tunneling Disable the USB4 PCIE Tunneling option.
By default, the option is disabled.
USB4 CM Mode Disable the USB4 CM mode option.
By default, the option is disabled.
Video/Power only on Type-C Ports Enable or disable the Type-C port functionality to video or only power.
By default, the Video/Power only on Type-C Ports option is disabled.
BIOS setup 69
To Next Page
Loading...
