Table 35. System Setup options—Overview menu(continued)
Overview
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
64-Bit Technology Displays whether 64-bit technology is used.
MEMORY Information
Memory Installed Displays the total computer memory installed.
Memory Available Displays the total computer memory available.
Memory Speed Displays the memory speed.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Memory Channel Mode Displays single or dual channel mode.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Memory Technology Displays the technology that is used for the memory.
DEVICES Information
Panel Type Displays the panel type of the computer.
Panel Revision Displays the panel revision of the computer.
Video Controller Displays the video controller type of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the wireless device information of the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays the Bluetooth device information of the computer.
Pass Through MAC Address Displays the MAC address of the video pass-through.
Table 36. System Setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of the computer.
NOTE: To view this option, enable Service options as described in View
Service options.
Boot Sequence Displays the boot sequence.
Enable PXE Boot Priority When enabled, the new PXE boot option is detected and added to the top of the
boot sequence.
By default, the PXE Boot priority option is disabled.
Secure Digital (SD) Card Boot Enables or disables read-only boot from Secure Digital (SD) card.
By default, the Secure Digital (SD) Card Boot option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
104 BIOS Setup
To Next Page
Loading...
