Table 10. System setup options—Display menu (continued)
Display
Brightness on AC power Enable to set screen brightness when the system is running on AC power.
Touchscreen
Touchscreen Enable or disable the touch screen for the operating system.
By default, the option is enabled.
Full Screen Logo Enable or disable full screen logo.
By default, the option is disabled.
Hybrid Graphics
Enable Hybrid Graphics Enable or disable the Enable Hybrid Graphics.
By default, the option is enabled.
Direct Graphics Controller Direst Output
Mode
Enable or disable the Direct Graphics Controller Direst Output Mode.
By default, the option is disabled.
Table 11. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Enable or disable the on-board LAN controller.
By default, the Enabled with PXE option enabled.
Wireless Device Enable
WWAN/GPS Enable or disable the internal WWAN/GPS device.
By default, the option enabled.
WLAN Enable or disable the internal WLAN device.
By default, the option enabled.
Bluetooth Enable or disable the internal Bluetooth device
By default, the option enabled.
Contactless smartcard/NFC Enable or disable the internal Contactless smartcard/NFC device
By default, the option enabled.
Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Auto enabled option is selected.
Wireless Radio Control
Control WLAN radio Sense the connection of the system to a wired network and later disable the
selected wireless radios (WLAN).
By default, the option is disabled.
Control WWAN radio Sense the connection of the system to a wired network and later disable the
selected wireless radios (WWAN).
By default, the option is disabled.
Dynamic Wireless Transmit Power Enable or disable the Dynamic Wireless Transmit Power of WLAN device.
By default, the Dynamic Wireless Transmit Power option is selected.
HTTPs Boot Feature
HTTPs Boot Enable or disable the HTTPs Boot feature.
100 BIOS setup
To Next Page
Loading...
