Table 8. System setup optionsāIntegrated Devices menu (continued)
Integrated Devices
By default, the Lan option is enabled.
Miscellaneous Devices Enable or disable Fingerprint Reader device.
By default, the Enable Fingerprint Reader Device option is enabled.
Unobtrusive Mode When the feature is enabled, it turns off all system light and sound.
By default, the option is disabled.
Table 9. System setup optionsāStorage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
Storage interface
Port Enablement This page allows you to enable the onboard drives.
By default, the M.2 PCIe SSD-0, M.2 PCIe SSD-1, M.2 PCIe SSD-2, and
M.2 PCIe SSD-3 options are enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Drive Information
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD-0 type information of the system.
Device Displays the M.2 PCIe SSD-0 device information of the system.
Type Displays the M.2 PCIe SSD-1 type information of the system.
Device Displays the M.2 PCIe SSD-1 device information of the system.
Type Displays the M.2 PCIe SSD-2 type information of the system.
Device Displays the M.2 PCIe SSD-2 device information of the system.
Type Displays the M.2 PCIe SSD-3 type information of the system.
Device Displays the M.2 PCIe SSD-3 device information of the system.
Enable MediaCard
Secure Digital (SD) Card Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is
disabled.
Table 10. System setup optionsāDisplay menu
Display
Display Brightness
Brightness on battery power Enable to set screen brightness when the system is running on battery power.
BIOS setup 99