The gure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure:
Steps
1 If required, align the solid-state drive bracket to accommodate the M.2 2230 solid-state drive.
2 Align the notch on the solid-state drive module with the tab on the solid-state drive slot.
3 Slide the solid-state drive module rmly into the solid-state drive slot at an angle.
4 Replace the screw (M2x4) that secures the solid-state drive module to the palm-rest and keyboard assembly.
26
Disassembly and reassembly
To Next Page
Loading...
