Dell Vostro 7590 - Installing the Palm-Rest and Keyboard Assembly

Step
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
Installing the palm-rest and keyboard assembly
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The gure indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the installation procedure.
Step
Place the palm-rest and keyboard assembly on a at surface.
Next step
1 Install the system board.
2 Install the touchpad.
3 Install the power-adapter port.
4 Install the power button with ngerprint reader.
5 Install the I/O board.
6 Install the display assembly.
7 Install the speakers.
8 Install the CPU fan.
9 Install the GPU fan.
10 Install the hard drive.
11 Install the WLAN card.
12 Install the battery.
13 Install the base cover.
14 Follow the procedure in After working inside your computer.
68
Disassembly and reassembly