Installing the display bezel
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The gure indicates the location of the display bezel and provides a visual representation of the installation procedure.
Step
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next step
1 Install the display assembly.
2 Install the WLAN card.
3 Install the battery.
4 Install the base cover.
5 Follow the procedure in After working inside your computer.
Disassembly and reassembly
59
To Next Page
