Steps
1 Open the latch and disconnect the hard-drive cable from the system board.
2 Remove the three screws (M2x4) that secure the hard-drive bracket to the palm-rest and keyboard assembly.
3 Lift the hard-drive assembly, along with its cable, o the palm-rest and keyboard assembly.
4 Disconnect the interposer from the hard-drive assembly.
5 Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
6 Lift the hard drive o of the hard-drive bracket.
Disassembly and reassembly
29
To Next Page
Loading...
