Page 2 of 84 eZFC-424R4-24 Application Guide
Edition 2.6
LINKnet Devices 14
Data Exchange 15
Alarming 15
Trend Logs 16
Programming 17
enOcean Integration (firmware 2.2 and higher) 18
Upgrade to Fully Programmable Using Flash Loader (firmware 2.2 and higher) 18
Fan Coil Programmable Objects 19
Fan Coil and Heat Pump Programmable Objects 19
Relationship Between Algorithm Unit Modules 20
General Tab 22
What is the General Tab? 22
Device Information 22
Network Settings 23
Global Settings 24
Local Inputs Tab 26
Setting Up a Hardwired Temperature Sensor 26
Set Up a Hardwired Temperature Sensor 26
Setting Up a Hardwired Occupancy Input 27
Set Up a Hardwired Occupancy Input 27
Setting Up a Hardwired CO2 Sensor 29
Setting Up a Fan Speed Switch 30
Setting Up a Fan Coil 2-Pipe Changeover Sensor 30
Setting Up a Condensate Level Switch 31
Setting Up Other Supporting Inputs 31
To Next Page
Loading...
Need help?
General
