eZFC-424R4-24 Application Guide
Edition 2.6
Page 3 of 84
Set Up an Input 31
Setting Up Damper Feedback 32
Local Outputs Tab 33
Setting Up a Fan Coil or Heat Pump Output 33
Set up a Fan Coil Output 33
Setting Up a Fan Output 35
Set Up a Fan Output 35
Setting Up Other Outputs 37
Set Up an Output 37
Setting Up a Damper Output 38
Set Up a Damper Output 38
LINKnet I/O Tab 39
Configuring an eZNS-T100 Network Sensor 39
Set Up the Temperature Sensor 39
Set Up the Humidity Sensor 40
Set Up the CO2 Sensor 40
Set Up the Occupancy Sensor 40
Assign Functions to the Buttons and Slider 41
Set Up the LCD Display 41
Assigning Buttons and Slider Elements on eZNS-T100 Network Sensor 42
Introduction 42
Set Up the Buttons and Slider Elements 44
Configuring DNS-24L Network Sensor 47
Introduction 47
Set Up the Temperature Sensor 47