AH500 Programming Manual
3-4
3.2.2 Applied Instructions
The descriptions:
: The applied instruction number
: The instruction name
: If the 16-bit instruction can be used as the 32-bit instruction, a D is added in front of the 16-bit
instruction to form the 32-bit instruction.
: indicates that the instruction can be used as the pulse instruction, whereas ─ indicates that it
can not.
If users want to use the pulse instruction, they only need to add a P in back of the instruction.
: The symbol used in the ladder diagram in ISPSoft
: The function
: If the 32-bit floating-point number instruction can be used as the 64-bit floating-point number
instruction, a D is added in front of the 32-bit floating-point number instruction to form the 64-bit
floating-point number instruction.
To Next Page
Loading...
