Delta AH500 - Stepping Relays

AH500 Programming Manual
2-46
Limited
to
Special auxiliary
relay
Refresh time
SM2018
User define. The flag is refreshed, after the transmission is done.
SM2019
The flag is refreshed when the instruction EMDRW is executed.
SM2020
The flag is refreshed when the instruction EMDRW is executed.
SM2021
The flag is refreshed when the instruction EMDRW is executed
and an error occurs.
SM2022
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
SM2023
The flag is refreshed when the instruction EMDRW is executed.
SM2024
User define. The flag is refreshed, after the transmission is done.
SM2025
The flag is refreshed when the instruction EMDRW is executed.
SM2026
The flag is refreshed when the instruction EMDRW is executed.
SM2027
The flag is refreshed when the instruction EMDRW is executed
and an error occurs.
SM2028
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
SM2029
The flag is refreshed when the instruction EMDRW is executed.
SM2030
User define. The flag is refreshed, after the transmission is done.
SM2031~SM2032
The flag is refreshed when the instruction EMDRW is executed.
SM2033
SM2033 is refreshed when the instruction EMDRW is executed
and an error occurs.
SM2034
SM2034 is refreshed when the instruction EMDRW is executed
and there is a response timeout.
SM2035
The flag is refreshed when the instruction EMDRW is executed.
SM2036
User define. The flag is refreshed, after the transmission is done.
SM2037
The flag is refreshed when the instruction EMDRW is executed.
SM2038
The flag is refreshed when the instruction EMDRW is executed.
SM2039
The flag is refreshed when the instruction EMDRW is executed
and an error occurs.
SM2040
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
SM2041
The flag is refreshed when the instruction EMDRW is executed.
SM2042
User define. The flag is refreshed, after the transmission is done.
SM2043
The flag is refreshed when the instruction EMDRW is executed.
SM2044
The flag is refreshed when the instruction EMDRW is executed.
SM2045
The flag is refreshed when the instruction EMDRW is executed and
an error occurs.
SM2046
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
SM2047
The flag is refreshed when the instruction EMDRW is executed.
SM2048
↓
SM2303
The flag is refreshed every scan cycle.
Note: The models AH5×0 and AH5×1 shown in the column of “Limited to” refer to
AHCPU500/510/520/530 and AHCPU501/511/521/531 respectively.
2.2.9 Stepping Relays
The function of the stepping relay:
The stepping relay can be easily used in the industrial automation to set the procedure. It is the most
basic device in the sequential function chart (SFC). Please refer to ISPSoft User Manual for more
information related to sequential function charts.